Xperia L C2104 Facing Problem Stuck On Bootloop/Xperia Logo/Auto start.

Oppssss I bricked my phone !!!!! :(
Shit why did i do this,Now how do i get my xperia back in working condition.
Here is the Answer for this, I am not a superman all the credit goes to the developers of the tools and this methods.

Here is a step by step guide to get your phone working :-





Disclaimer :- I am a poor person so I wont be able to help you if you hard brick your phone. I am not responsible for any damage to your phone.If you agree to this you can GO AHEAD.

Step 1 ) Download flashtool from here  https://github.com/Androxyde
Step 2 ) Install Flashtool
Step 3 ) In the meanwhile you will have to download the Firmware that is the .ftf file for                                              flashtool. Click here to download .
Step 4 ) TO install drivers go the drive where you have installed Flashtool for example the default destination               is C drive in windows here is an image for your reference.

Step 5 ) Double click on flashtools and open drivers,there you will find an application named Flashtool-                      drivers double click on the application and install the drivers you will get a screen somewhat like                     this.

Step 6 )Hit Next  see the screen below to match your screen.

Step 7 ) Tick the check box of all the devices and click install,follow the instructions ( you only                    have to hit the next button and install the drivers )  :)

Step 8 ) Now Copy the .ftf file which you downloaded earlier in the firmware folder which you will find in the               flashtool folder in C drive.

Step 9 ) Open flashtool,click on the lightning bolt symbol in the startmenu.

Step 10) Then once the application is running click on the lightning bolt symbol in the application

Step 11) Select Flashmode



Step 12) Select the firmware and click on flash

You can find a firmware named on your device that is Xperia_C2104 etc. in the firmware tab.



Step 13) Now when you get this prompt like the one below connect only the usb cable to your computer.
               Switchoff your Phone, wait for 5 seconds then press and hold the volume down button and                            connect it to the usb.You will notice a quick flash of green along with red light on the device.



Step 14) The process is started now be patience. You device is almost alive.





















Step 15) Once Flashing is completed you will see Flashing finished. in the line fourth from bottom.If you are                 able to see this Bingo !!! the process is completed and you can start you device
The initial boot will take a few minutes.

Warning : - During this process do not disconnect your phone .